To counter this potential inconvenient, we are going to run Ubuntu from a live USB drive – so you can test Ubuntu and see whether it’s something you would want without touching your current operating system.The Niresh Mac OS X Mavericks 10. When this is done you can eject the USB stick.I know that some of you aren’t yet convinced whether you want to make the switch to Linux and leave Windows or macOS behind. The copy process may take a little while, depending on the speed of your thumb drive. Now copy all files to your USB drive (e.g. When the Windows 10 ISO download is done, double click the file to open it. Create a bootable USB drive.
![]() Usb Boot Drive Mac OS XNext, we need to download the Ubuntu ISO image. You can also download the portable version so you don’t have to install it on your system.Note: If you downloaded the normal version, go through with the installation process. Visit this link ( here), scroll down to the Download section and download the latest version of Rufus. But keep in mind that the guide below will be using Rufus.When you are ready, follow the instructions now below to create a bootable USB drive of Ubuntu and use it as a live USB drive: Now there are quite a lot of tools that we can use to do this, but we recommend using Rufus – it’s faster and more dependable than most of the other options.Note: Another solid tool that you can use to create a bootable USB drive is Universal USB Installer. Method 1: Creating a Bootable USB Drive on WindowsWindows is not capable of converting an ISO file to a bootable USB drive natively, so we’ll need to use a third-party tool. Then, hit the Select button and navigate to the location where you previously downloaded the ISO file, select it and hit the Open button. Next, under Boot selection, select Disk or ISO image. Then, click the Device drop-down menu in Rufus and make sure that the proper USB drive is selected. We highly encourage you to make sure that you don’t leave any important files on the disk since the entire content of the drive will be erased. Once the ISO file of Ubuntu is downloaded open Rufus and connect a USB drive with at least 2GB of free space. Next, download the latest available LTS version. When the process is complete, you can close Rufus. Depending on your systems specifications and the distribution that you’re using, this might take a little over 2 minutes. Hit OK at the final prompt to confirm the deletion of the data present on the USB flash drive. At the ISOHybrid image detected prompt, select Write in ISO Image Mode (Recommended) and hit OK to commence the creation of the image. If prompted by the Syslinux prompt, hit Yes to initiate the download. Once all the options are in order, hit the Start button to begin creating the Ubuntu bootable USB drive. But before we get around to do this, it’s important to make sure that the USB stick is properly prepared.Follow the guide down below to create a bootable USB stick from a MAC: However, we’re going to show you a much simpler way to do this. Then, select the USB disk that you’ve just created and start using Ubuntu without installing it – to use the Live USB feature, click on Try Ubuntu.Method 2: Creating a Bootable USB Drive from MacIf you need to create a bootable USB Drive with the Ubuntu distribution from a Mac, there’s no other native way to do it than from using the Terminal. At boot time, press the key associated with the boot menu (F2, F10, F8 or F12 on most computers). In case you’re using it on a different computer, plug the bootable USB into the other computer and start the computer. Set default programs in mac for opening filesThen, set the Format to MS-DOS (FAT) and click the Erase button to re-format the USB drive. Once it becomes available inside Disk Utility, select it and click the Erase button at the top of the window. To do this, click the Spotlight icon (top-right corner) and search for Disk Utility. Once you open Disk Utility, make sure that the USB stick is properly connected. Next, we’ll need to reformat the USB stick with the Disk Utility software. Then, visit this official link ( here) and download the Ubuntu ISO file to your Mac. ![]() Once you do so and the process starts, wait until you see the “ Flash Complete!” message.Note: When the flash is complete, your macOS might display a message saying that “The disk you inserted is not readable by this computer”. Before starting the process, Etcher will ask you to input your administrator password. Next, kick-start the re-flashing process by clicking the Flash! button. Once the ISO file is selected, click the Select drive button and select the USB device that you previously reformatted. This will launch the Startup manager which will show all the available bootable devices connected to the machine. In case you want to use the Ubuntu Live USB stick on a MAC, insert the USB stick and restart (or power on) your Mac while holding the Option key. Instead, click on Eject and remove the USB device. Next, insert the USB driver that will act as the Live drive. In Ubuntu, click on the Show Application button and then use the search function to search for Startup Disk. Then, double-click Startup Disk Creator to open the application. If you are running a different Linux distribution, check your Dash for a similar tool.Here’s a quick guide to creating a bootable USB drive on Ubuntu: Opening it will bring you to the Standard Ubuntu boot menu, where you can choose Try Ubuntu to launch a live image.Method 3: Creating a Bootable USB Drive from UbuntuIf you’re already on Ubuntu, you don’t need a Windows or Mac computer to create a bootable USB drive with Ubuntu – you can do it straight from your current OS.The Ubuntu distribution includes an extremely helpful tool called Startup Disk Creator – this will allow you to create a bootable USB drive from an ISO file.Note: Most Linux distributions have a tool similar to Startup Disk Creator, but some have a different name. Then, click on Try Ubuntu to launch a live image. Once the Live USB bootable disk is created, insert into the computer that you wish to run Ubuntu on and boot from the USB drive. Once the disk is loaded and the ISO image selected, click on the Make Startup Disk and wait for the process to complete.
0 Comments
Leave a Reply. |
Details
AuthorVicky ArchivesCategories |